- 8 or 16 instrumentation amplifiers, gain selectable by switches among five values: x1, x100, x200, x300 e x600. Other gains (combination of primary gains) can be set: x500, x1000 ou x1200. The x100 gain can be changed by resistor replacement;
- input configuration defined by switches: thermocouple, voltage (from ±10mV to ±10V) and current (up to ±40mA);
- 2a order low pass filter, Butterworth type. Factory defined to 35 Hz, but user can change capacitors to change the frequency;
- AD converter with 12 bits resolution;
- maximum acquisition rate 500 samples/second, independs on active channel count;
- digital output: 16 TTL level;
- digital input: 16 TTL level;
- 01 pulse input configurable as counter, frequency meter, period meter;
- Ethernet communication, 10baseT;
- power supply: 12 VDC throught AC adaptor (110/220 Vac).
- Metal case, dimentions: 45 x 310 x 250 (mm, High x Width x Depth);
Options:
- ICP type sensor conditioner;
- Pt100 type sensor conditioner;
- Wheatstone bridge sensor conditioner:
- full bridge;
- ½, ¼ 120 ohms bridge;
- potentiometers;
- bridge excitation: 2,5V, 5,0V or 10V divided in groups of 8 channels (channels of the same group will have the same excitation voltage);
- Balance adjust throught trimpot;
- Shunt call by switch;
- Shunt call application with relay (software Shunt-Cal: opção AutSnt)